{{ $t('shop.all.spaetbestellservice.hinweis') }}
Valve function | 2x3/2 open monostable |
Actuation type | Electrical |
Build.width [mm] | 26 |
Operating pressure [bar] | 3 to 8 |
Construction set up | Piston pusher |
Reset mode | Pneumatic spring |
Permission |
C-tick, c CSA us (OL), c UL us - Recognized (OL) |
CE certificate (see declaration of conformity) | to EU EMC directive |
Protection category |
IP65, NEMA 4 |
Nominal width [mm] | 9 |
Pitch dimension [mm] | 27 |
Exhaust function |
drosselbar, über Drosselplatte, über Einzelanschlussplatte |
Sealing principle | Soft |
installation position | arbitrary |
Complies to standard | ISO 15407-1 |
Hand assist actuation | tentative |
Control type | pilot operated |
Control air supply | Internal |
Flow direction | Not reversible |
Überdeckung | positive Überdeckung |
Signal condition display | LED |
Flow valve [l/min] | 1.250 |
Flow valve single connection plate [l/min] | 1.000 |
Flow valve pneumatically linked [l/min] | 900 |
Shifting time off [ms] | 33 |
Shifting time on [ms] | 20 |
Power-on time | 100 % |
Max. positive test impulse at 0 signal [µs] | 500 |
Max. negative test impulse for 1 signal [µs] | 500 |
Nominal tightening current per solenoid | 110 mA to 20 ms |
Nominal current for current reduction | 30 mA after 20 ms |
Coil characteristic value | 24 V DC: Low current phase 1 W, high current phase 2,4 W |
Permitted voltage oscillations | ± 10 % |
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
Information about operating and control medium | Oiled operation possible (required in further operations) |
Oscillation strength | Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
Shock resistance | Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27 |
Corrosion resistant class KBK | 2 - moderate corrosion stress |
Medium temperature [°C] | -5 to 50 |
Relative humidity | 0 - 90 % |
control medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
ambient temperature [°C] | -5 to 50 |
Max. tightening torque Valve fastening [Nm] | 1.8 to 2.2 |
Product weight [g] | 270 |
Electrical connection |
M12x1, 3 pin, Round shape, Central plug |
Fastening type |
on connection plate, With Throughway bore and screw |
Material information | RoHs compliant |
Seals material |
FKM, HNBR, NBR |
Housing material | Aluminium die casting |
{{ $t('shop.all.gewicht') }} | 270 g / pcs |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84812090 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred, please reload this page and try again.