{{ $t('shop.all.spaetbestellservice.hinweis') }}
Design | Angular |
Based on standard |
EN 60947-5-2, ISO 5211, VDI/VDE 3845 |
CE certificate (see declaration of conformity) | to EU EMC directive |
ATEX gas category | II 2G |
Ex ignition protection type gas |
AEx d IIB T5 Gb, AEx nA IIC T5 Gc, Ex d IIB T5 Gb, Ex nA IIC T5 Gc |
ATEX dust category | II 2D |
Ex ignition protection type dust |
AEx tb IIIC T108°C Db, Ex tb IIIC T108°C Db |
Ex protection approval outside of the EU |
EPL Gb (CA), EPL Gb (US), EPL Gc (CA), EPL Gc (US), Class III (US), EPL Db (CA), EPL Db (US), Class I, Div. 1 (CA), Class I, Div. 1 (US), Class I, Div. 2 (CA), Class I, Div. 2 (US), Class II, Div. 1 (CA), Class II, Div. 1 (US), Class III (CA) |
Ex ambient temperature | -20°C <= Ta <= +60°C |
Certified awarding point | CSA 263311 |
Material information |
LABS containing materials included, RoHs compliant |
Safety Integrity Level (SIL) | SIL 2 |
Measurement principle | Inductive |
ambient temperature [°C] | -20 to 60 |
Control output | Contactless 2-wire |
Switching element function | NO contact |
Max. output current DC [mA] | 100 |
Operating voltage range DC [V] | 5 to 60 |
Electrical connection |
10 pin, Screw clamp |
Lockable conductor nominal cross-section [mm²] | 0.25 to 2.5 |
Cable screwing | 1/2 NPT |
Fastening type |
on flange according to ISO 5211, With mounting brackets |
installation position | arbitrary |
Product weight [g] | 1.700 |
Housing colour | silver |
Housing material | Aluminium die casting |
Seals material | NBR |
Shaft material | High-alloyed stainless steels |
Screws material | High-alloyed stainless steels |
Mounting bracket material | High-alloyed stainless steels |
Pointer material | PC |
Circlip material | High-alloyed stainless steels |
Washer material | High-alloyed stainless steels |
position indicator | yellow / red |
Settings range angle recording [deg] | 0 to 90 |
Bearing temperature [°C] | -20 to 60 |
Protection category |
IP67, NEMA 4/4X |
Shock resistance | Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27 |
Oscillation strength | Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
Degree of contamination | 3 |
Permission | RCM mark |
Voltage drop [V] | <= 5 V |
Residual current [mA] | 0 to 1 |
Reverse polarity protection | for all electrical connections |
Minimum load current | 4 mA |
{{ $t('shop.all.gewicht') }} | 1.700 g / pcs |
{{ $t('shop.display.artikel.zollwarennummer') }} | 85365019 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred, please reload this page and try again.