EMCA-EC-67-M-1TE-EP (8061202) Integrated Drive

OT-FESTO071155

Exemplary representation: EMCA-EC-67-S-1TE-CO (8034238)   &   EMCA-EC-67-S-1TM-PN (8069727)   &   EMCA-EC-67-M-1TM-EC (8069732)  & ...
1165,14€ incl. VAT
pcs
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Operating mode controller PWN, MOSFET power end level,
P position controller,
Cascade controller with,
PI speed controller,
Proportional and integral controller for current
Rotor position transducer Encoder absolut single turn
Rotor position transducer measurement principle Magnetic
Protection function I²t monitoring,
Drag error monitoring,
Software endpoint detection,
Voltage blackout detection,
Current monitoring,
Temperature monitoring
Safety function Safe switched off torque (STO)
Safety Integrity Level (SIL) Safe switched off torque (STO) / SIL 2
Performance Level (PL) Safe Torque off (STO) / category 3, Performance Level d
Display LED
Max. speed [1/min] 3.300
Nominal rotational speed [1/min] 3.150
Braking resistance, external [Ohm] 6
Diagnose degree of coverage [%] 90
Properties digital logic outputs Partially freely configurable,
Not galvanically separated
Hardware error tolerance 1
Max. current digital logic outputs [mA] 100
Max. positive test impulse at 0 signal [µs] 10.000
Max. negative test impulse for 1 signal [µs] 600
Nominal performance motor [W] 150
Nominal voltage DC [V] 24
Nominal current [A] 7,2
Parameterising interface Ethernet
Report Ethernet / IP
SFF Safe Failure Fraction [%] > 90 %
Max. number of movement sets 64
Rotor position transducer resolution [Bit] 12
Peak performance motor [W] 200
Peak current [A] 10,3
Permitted voltage oscillations ± 20 %
Permission RCM mark,
c UL us - Recognized (OL)
KC-mark KC-EMV
Certified awarding point TÜV 01/205/5514.00/16,
UL E331130
CE certificate (see declaration of conformity) to EU EMC directive,
to EU machinery directive
Oscillation strength Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27
Bearing temperature [°C] -25 to 70
Relative humidity 0 - 95 %,
Not condensing
Protection category IP54
ambient temperature [°C] 0 to 50
Information about ambient temperature Above an ambient temperature of 20 °C, a power reduction of 1.75 % per °C.
Mass inertia Rotor [kg/cm²] 0,301
Nominal torque [Nm] 0,45
Peak torque [Nm] 0,91
Permitted axial shaft loading [N] 60
Permitted radial shaft loading [N] 100
Probability of Failure per Hour in [1/h]. 1e-009
PED (Probability of failure on demand) 1.86e-005
Proof test interval [A] 20
Product weight [g] 2.260
Quantity digital logic outputs 24 V DC 2
Quantity digital logic inputs 2
Communication profile FHPP
Logic input specification Depending on IEC 61131-2
Work area logic input [V] 24
Properties logic inputs Galvanically connected with logic potential
Ethernet supported protocols TCP/IP
Switching logic inputs PNP (Positive switching)
Switching logic outputs PNP (Positive switching)
Fastening type With throughway bores,
Permanently screwed
Material information LABS containing materials included,
RoHs compliant
OT-FESTO071155
{{ $t('shop.all.gewicht') }} 2.260 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }} 85013100
{{ $t('shop.all.hersteller') }} Festo
{{ $t('shop.all.dokumente') }}

 
{{ $t('shop.all.unverbindliche_richtwerte') }}

Accessories

{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.