Coupling plug (AP) with male thread, Polypropylene

Plug diameter:
11 mm (holding groove approx. 3,4 mm)

Flow air (water)*:
700 - 1500 l/min (10 - 17 l/min)

Function:
Coupled by plugging the plug into the sleeve until you hear a “click”. Pressing the ergonomic plastic release button (for couplings with a tube connection protected against accidental unlocking) releases the plug once again. It is possible to combine coupling plugs and coupling sockets with and without a shut-off valve, and made of different materials as desired. The shut-off valve prevents the medium from spilling out when uncoupled.


Type POM:


Materials:
Body, valves and release button: POM (raw material in accordance with FDA), valve springs: Stainless steel AISI 316, seals: NBR, external spring below push-button: AISI 302, bulkhead nut: nickel-plated brass

Temperature range:
-40°C to max. +80°C

Operating pressure:
-0.8 to 8.3 bar

Media:
Compressed air, water, alcohol, glycol, mineral oils, petrol, oxygen**, carbon dioxide, mild chemicals

Sterilisation possible with:
Formalin, isopropyl alcohol, ethyl alcohol

Operating range:
For general applications. High resistance to mineral oils.


Polypropylene type:


Materials:
Body, valves and release button: polypropylene (raw material in accordance with FDA), valve springs: Stainless steel AISI 316, seals: EPDM, spring below push-button: AISI 302, bulkhead nut: Nickel-plated brass, bulkhead seal: EPDM

Temperature range:
0°C to max. +70°C

Operating pressure:
-0.8 to 7,2 bar (>+27°C observe pressure reductions: +40°C: max. 5,4 bar,+ +50°C: max. 4,3 bar,+ 60°C: max. 3,4 bar,+ +70°C: max 2.0 bar)

Media:
Compressed air, water, many acids and alkaline solutions, alcohol, glycol, MEK, oxygen**, ozone, carbon dioxide, many chemicals

Sterilisation possible with:
Formalin, isopropyl alcohol, ethyl alcohol, ethylene oxide, gamma radiation

Operating range:
Suited for use with many chemicals. Not resistant to mineral oils.

Compatible with****:
CPC Colder APC, CPC Colder EFC12, LinkTech series 50AC, LinkTech series 50PP

Material	Polypropylene
Version	Without shut-off valve
Thread external	NPT 3/8"
Temperature range [°C]	0 to +70
Operating pressure [bar]	-0.8 to 7.2

{{ $t('shop.all.gewicht') }}	4,2 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }}	84812090
{{ $t('shop.all.hersteller') }}	LinkTech